1.Basic Parameters
Capacity: the water tank capacity is usually 2L-5L (large models can be more than 6L), a single filling to meet the needs of 3-7 days of drinking water.
Power: running power 5-15W (energy-saving mode can be as low as 2W), standby power consumption of about 1-3W.
Noise: as low as 25-40dB (close to the ambient noise), high-end models can be less than 20dB night mode.
Voltage: Suitable for 12-24V safe DC power, support USB interface or power adapter power supply, partially support mobile power.
Waterproof grade: IPX4 level splash-proof body (not fully waterproof), water pump and circuit partially sealed and isolated.
2.Core automatic function
Intelligent sensing start/stop
Infrared/Gravity Sensor:
When the pet is close to 10-30cm, the water will come out automatically, and the water will be shut off after 15-60 seconds delay after leaving. Support Multi-angle sensing (120° wide-angle coverage) to avoid leakage trigger.
Power saving mode: automatically enter into low-power standby when no one/pet is using it.
Water shortage protection and automatic power off
Water level monitoring:
Real-time water level monitoring via float switch or electrode type sensor.
When the water level is lower than the safety line, stop the pump immediately and send out a beep/light reminder.
Anti-dry burning design: the pump motor has a built-in temperature sensor, automatic power-off when abnormally high temperature.
3. Cycle mode automation
Intermittent Cycle: Default stopping 2 minutes for every 5 minutes of work to prolong the life of the pump.
Timed cycle: can be set 3-6 times a day to start the water flow at a fixed time (e.g. morning, midday and evening peaks).
4. Adaptable Scene
Multi-pet family: above 5L large capacity + multiple outlets, support 3-5 pets drinking water at the same time.
Outdoor use: support charging treasure power supply (5V/2A), endurance 8-12 hours.
Sensitive pets: mute + soft night light, reduce stress reaction.
Valoraciones
No hay valoraciones aún.